Penpower WorldCard duet - Manual (Page 74)

7- WorldCard
To capture a card, place your card in the
card holder. After a card is placed in the
holder, you will see the card in the Capture
window. You may need to shift the card
right or left to have a uniform alignment as
the preview screen right.
Rotate your card in the holder and click Capture again to capture the back side of you
card. You will see some active scanning processing in the Preview pane during the capture
operation. You also have the option on the Capture Panel dialog box to recapture the front
side or skip the backside. Click Capture.
Once the card is properly positioned, select the appropriate Card Style and language op-
tions.
Once the correct options have been selected, capture the card by clicking Capture
.
If the double-sided card option has been selected, WorldCard will prompt you to insert
the back side of the card with a tip in the Capture Status dialog box as shown in the follow-
ing picture.