Listening to your system 02, Using front surround, Using advanced surround – Pioneer S-DV434ST User Manual
Page 12: Adjusting the effect level, Dolby pro logic ii music settings
Listening to your system
02
12
En
Dolby Pro Logic II Music settings
When listening in Dolby Pro Logic II Music
mode, there are three settings you can adjust:
Center Width, Dimension, and Panorama.
1
With Dolby Pro Logic II Music mode active,
press
SOUND
.
2
Use
/
to select ‘C Width’, ‘Dimen.’ or
‘Pnrm.’
•
C Width
(Center Width): Makes the center
channel wider (higher settings) or
narrower (lower settings)
•
Dimen.
(Dimension): Makes the sound
more distant (minus settings), or more
forward (positive settings)
•
Pnrm.
(Panorama): Creates more spacious
surround sound
3
Use
/
to adjust the setting then press
ENTER
to confirm.
Using Front Surround
The Front Surround modes are effective when
you are using the Front surround 3-spot
speaker setup as described in
Home theater
sound setup
on page 6. The surround speakers
should be placed on top of the front speakers
and oriented either towards the walls, or
straight ahead, depending on which mode you
are using (see below).
•
Press FRONT SURROUND to select a Front
Surround mode.
Press repeatedly to select
FrtMovie
,
FrtMusic
or
ExtPower
.
• If you have selected
FrtMovie
or
FrtMusic
,
turn each surround speaker so that the
arrow at the base is lined up with the
FRONT SURROUND
arrow on the front
speaker. With
ExtPower
(Extra Power), the
surround speakers should be in the same
direction as the front speakers (as shown
below).
• See
Adjusting the effect level
below to
emphasize or reduce the Front Surround
effect.
Using Advanced Surround
The Advanced Surround effects can be used
with any multichannel or stereo source for a
variety of additional surround sound effects.
1
•
Press
ADVANCED
to select an Advanced
Surround mode.
Press repeatedly to select
AdvMovie
,
AdvMusic
,
Expanded
,
TV Surr.
,
Sports
,
Game
or
5 Stereo
.
Adjusting the effect level
You can emphasize or reduce the effect of the
Front Surround or Advanced Surround modes
as you like.
2
1
With one of the Front or Advanced
Surround modes active, press
SOUND
.
2
Use
/
to select ‘Effect’.
3
Use
/
to adjust the effect level then
press
ENTER
to confirm.
CD
FM/AM
OPEN CLOSE
DVD
TUNER
TV
LINE
L1/L2
0
8
FRONT
SURROUND
Note
1 The 5-spot setup described in
Home theater sound setup
on page 6 should be used with these effects.
2 You can set the effect level for all modes independently.
FrtMovie / FrtMusic
ExtPower
0
CLR
ENTER
MAIN
SUB
SUB
ADVANCED
SOUND
DIALOGUE
SURROUND
MIDNIGHT
QUIET/
XV-DV333-434.book 12 ページ ２００５年２月２３日 水曜日 午後１時５２分