Pioneer S-DV434ST - Manual (Page 25)

Initial Settings menu 07
25
En
English
Français
Deutsch
Nederlands
Italiano
Español
Chapter 7
Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1 Press HOME MENU and select ‘Initial
Settings’.
2 Use the cursor buttons and ENTER to
select the setting and option you want to set.
All the settings and options are explained on
the following pages.
Important
• In the table below, the default setting is
shown in bold : other settings are shown in
italics .
• Some settings, such as TV Screen , Audio
Language and Subtitle Language may be
overridden by the DVD disc. Often these
settings can also be made from the DVD
disc menu.
• The Component Out setting only needs to
be set if you have connected this player to
your TV using component video.
Video Output settings
Initial Settings
Setting Option What it means
TV Screen
(See also Screen sizes
and disc formats on
page 42.)
4:3 (Letter Box) Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
4:3 (Pan & Scan) Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
16:9 (Wide) Set if you have a widescreen TV.
Component Out
(See also Connecting
using the component
video output
on
page 31.)
Interlace Set if your TV is not compatible with progressive scan video.
Progressive Set if your TV is compatible with progressive scan video (see
your TV’s instruction manual for details). Press
ENTER once
more to confirm (or RETURN to cancel).
Note that progressive scan video is only output from the
component video jacks.
XV-DV333-434.book 25 ページ ２００５年２月２３日 水曜日 午後１時５２分