Pioneer S-DV434ST - Manual (Page 50)

Additional information 10
50
En
Wall-mounting the front and
surround speaker system
Attaching the brackets
• Make sure to tighten the supplied screw as
securely as possible when attaching the
bracket to the back of the speaker.
• Please do not attach the brackets to the
center speaker.
• Please do not attach the brackets to the tall
front speakers supplied with the S-DV434
speaker system.
Before mounting
• Remember that the speaker system is
heavy and that its weight could cause the
wood screws to work loose, or the wall
material to fail to support it, resulting in the
speaker falling. Make sure that the wall on
which you intend to mount the speakers is
strong enough to support them. Do not
mount on plywood or soft surface walls.
• Mounting screws are not supplied. Use
screws that are suitable for the wall
material and that will support the weight of
the speaker.
Note
• If you are unsure of the qualities and
strength of the walls, consult a
professional for advice.
• Pioneer is not responsible for any
accidents or damage that result from
improper installation.
5 – 7 mm
Mounting screw (not supplied)
Bracket screw (supplied)
5 mm
10 mm
XV-DV333-434.book 50 ページ ２００５年２月２３日 水曜日 午後１時５２分