Panasonic KX-FT934HK - Manual (Page 16)

4. Telephone
16
4.5 Editing a caller’s telephone
number before calling back
1 Press {CALLER ID}.
2 Press {A} or {B} repeatedly to display the desired
item.
3 Press {CALLER ID} to display the telephone
number.
4 To insert a number in front of the telephone number,
press the desired dial key ({0} to {9}).
L You can also initiate the editing mode by
pressing {*}.
5 Lift the handset or press {MONITOR} to call back
the edited number.
L The unit will start dialling automatically.
L To send a fax, insert the document FACE DOWN
and press {FAX/START}.
Note:
L The edited telephone number will not be saved as
caller information. To store it into the phonebook, see
page 17.
To correct a mistake
1. Press {<} or {>} to move the cursor to the incorrect
number.
2. Press {STOP} to delete the number.
3. Enter the correct number.
To delete a number
Press {<} or {>} to move the cursor to the number you
want to delete and press {STOP}.
To insert a number
1. Press {<} or {>} to move the cursor to the position to
the right of where you want to insert the number.
2. Enter the number.
4.6 Erasing caller information
Erasing all caller information
1. Press {MENU} repeatedly to display “ CALLER
SETUP”.
2. Press {SET}.
L “ CALL LIST ERASE” will be displayed.
3. Press {SET}.
L To cancel erasing, press {STOP} 3 times.
4. Press {SET}.
5. Press {STOP}.
Erasing specific caller information
1. Press {CALLER ID}.
2. Press {A} or {B} repeatedly to display the desired
item.
3. Press {<}.
L To cancel erasing, press {STOP} 2 times.
4. Press {SET}.
L To erase other items, repeat steps 2 to 4.
5. Press {STOP}.
4.7 Storing caller information into
the phonebook / one-touch dial
Important:
L This feature is not available if the caller
information does not include a telephone
number.
{ STOP}
{ CALLER ID}
{ FAX/START} {A}{B}{<}{>}
{ MONITOR}
{ STOP}
{ CALLER ID}
{A}{B}{<}
{ SET}
{ MENU}
FT932_934HK-PFQX2561YA-en.book Page 16 Monday, May 8, 2006 5:05 PM