Initial programming, 4 dialling mode, 5 date and time – Panasonic KX-FT934HK User Manual
Page 10: 6 your logo, Dialling mode, Date and time, Your logo, 4 dialling mode, 5 date and time, 6 your logo
3. Preparation
10
Ringer type
L
You can select the ringer types from one of 3 types
for outside calls (feature #17 on page 27).
Handset receiver volume
While using the handset, press {A} or {B}.
Monitor volume
While using the monitor, press {A} or {B}.
Initial Programming
3.4 Dialling mode
If you cannot dial (page 18), change this setting
depending on your telephone line service. For tone dial
service, select “
TONE” (default). For rotary pulse dial
service, select “
PULSE”.
1
Press {MENU}.
SYSTEM SETUP
PRESS [( )]
2
Press {<} or {>} repeatedly to display the following.
DIALLING MODE
=TONE
[
±]
3
Press {A} or {B} repeatedly to display the desired
setting.
4
Press {SET}.
L
The next feature will be displayed.
5
Press {MENU}.
3.5 Date and time
You must set the date and time.
L
The other party’s fax machine will print the date and
time on each page you send according to your unit’s
date and time setting.
L
The accuracy of the clock is approximately
±60
seconds a month.
L
If a power failure occurs, the date and time setting
may be lost. If the correct date and time is not
displayed after the power has been restored, set the
date and time again.
1
Press {MENU}.
SYSTEM SETUP
PRESS [( )]
2
Press {<} or {>} repeatedly to display the following.
SET DATE & TIME
PRESS SET
3
Press {SET}.
L
The cursor (
|
) will appear on the display.
M:
|
01/D:01/Y:06
TIME: 12:00AM
4
Enter the current month/date/year by selecting 2
digits for each.
Example: August 10, 2006
Press {0}{8} {1}{0} {0}{6}.
M:08/D:10/Y:06
TIME:
|
12:00AM
5
Enter the current hour/minute by selecting 2 digits for
each. Press {*} repeatedly to select “
AM”, “PM”, or
24-hour time entry.
L
When neither “
AM” nor “PM” are displayed, 24-
hour time entry is selected.
Example: 15:20 (24-hour time entry)
Press {1}{5} {2}{0}.
M:
|
08/D:10/Y:06
TIME: 15:20
6
Press {SET}.
L
The next feature will be displayed.
7
Press {MENU}.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
3.6 Your logo
Your logo will be printed on the top of each page sent
from your unit.
{A}{B}{<}{>}
{
MENU}
{
SET}
{<}{>}
{
SET}
{
MENU}
FT932_934HK-PFQX2561YA-en.book Page 10 Monday, May 8, 2006 5:05 PM