Patton electronic G.SHDSL INTEGRATED 3086 User Manual
Page 106
Advertising
4 • Basic Application Configurations
Model 3086 G.SHDSL Integrated Access Device User Guide
106
DSLAM Connections with remote CPE units
5. Click on Edit ‘IP Interface.’
Verify or change if necessary the following Options parameters.
– Ipaddr:192.168.164.2
– Mask:255.255.255.0
– Dhcp:false
– MTU:1500
– Enabled:true
Click on the Change button if changes were made.
6. Again,
Configuration Menu > Configuration > IP Routes > Click on Create new Ip V4 Route > Create
the gateway to the remote
3086 by changing or verifying the following parameters in the webpage Edit—Advanced Settings.
– Destination:0.0.0.0
– Gateway:192.168.164.3
– Mask:0.0.0.0
– Cost:1
– Interface:[blank]
Advertising