Planet Technology MGSW-2402 - Manual (Page 10)

- 10 -
3.4 Modules
Modules page shows the modules that have installed into the MGSW-2402-Slot Intelligent
Switch. There are fixed 24x 10/100 Base-TX ports in Module 0, and another 2 slot ( module 1
and module 2 ) are used for expansion. In the following example, 1-port Gigabit 1000Base-SX
( LX ) Fiber Module, and 4-port 100Base-FX (ST) Fiber Module are installed into the Switch.
Figure 3-3 The Modules Page
3.5 Ports
Inside Ports page, you can enable/disable each port, configure Speed/Duplex for each port, and
assign VLAN ID.
The Port Management table shows the port status of all ports. You can also change some
properties of all ports in this table.
Figure 3-4 The Ports Page