Planet Technology MGSW-2402 - Manual (Page 22)

- 22 -
4 CONSOLE INTERFACE
4.1 CONNECT TO PC
RS-232 serial cable
Prepare a RS-232 serial cable. Attach the 9-pin female connector to the male connector on
the switch. Plug the other side of this cable to your PC.
Hyper Terminal
In Windows 95/98/2000/XP,launch “HyperTerminal”, create a new connection, and adjust
settings as below:
4.2 Main Menu
The main menu displays all the sub-menus that are available. Striking Enter, at a highlighted
option, will confirm the choice of the specified sub-menu. As shown in Figure 4-2, there are
thirteen menu items to choose from:
Device Settings
Port settings
Address Table
Spanning Tree Protocol
Broadcast Storm Filter
IGMP
VLAN Mode (2 modes)
VLAN for CPU (2 VLANs)
Secure IP for Telnet and HTTP
Save Current Settings
Factory Default Settings & Reboot System
Reboot System
Quit