Device sett, Port settings – Planet Technology MGSW-2402 User Manual
Page 23
- 23 -
Figure 4-1 The Main Menu of Console Management
4.2.1. Device settings
This menu contains system parameters to display and configure the switch to your network.
Menu items are:
Version (RO):
display the firmware version of MGSW-2402
MAC Address (RO):
display the MAC Address of MGSW-2402
System Up Time (RO):
display the work time of MGSW-2402
System Name:
display and change the system name of this Switch
System Location:
display and set the location of this Switch
System Contact:
display and set the administrator of this Switch
IP Address:
display and set the IP address of MGSW-2402
Subnet Mask:
display and set the Subnet Mask of MGSW-2402
Default Gateway:
display and set the gateway of MGSW-2402
Change User/Password:
allow to set the User name and password, default value is root
Console Login Enabled:
provide enable or disable Console login MGSW-2402
Quit:
logout on MGSW-2402
Figure 4-2: Device settings
4.2.2. Port Settings
Select any one port, the menu contains ten items for port management will shown up as
below:
•
Link (RO):
display the link state(UP/DOWN) of per port on MGSW-2402
•
Speed/Duplex (RO):
display the Speed/Duplex of the device connect to the port
•
Port Enabled:
allow enable or disable the port of MGSW-2402