Panasonic SLV-SE700B - Manual (Page 42)

42 Playing a tape
Additional tasks
To play an NTSC-recorded tape
Set NTSC PB at the rear of the VCR according to the colour system of your TV.
To set the colour system
If the playback picture has no colour, or streaks appear during playback, set the
STANDARD COULEUR option in the OPTIONS-1 menu to conform to the system
that the tape was recorded in (see page 79). (Normally set the option to AUTO).
To use the time counter
Press ANNUL/0 at the point on the tape that you want to find later. The counter in
the display window resets to “0:00:00.” Search for the point afterwards by referring
to the counter.
To display the counter on the TV screen, press AFFICH.
3 Press H LECTURE.
When the tape reaches the end, it will rewind automatically.
To Press
Stop play x STOP
Pause play X PAUSE
Resume play after pause X PAUSE or H LECTURE
Fast-forward the tape
M AV during stop
Rewind the tape
m RET during stop
Eject the tape Z EJECT
When your TV is Set NTSC PB to
PAL only ON PAL TV
PAL and NTSC NTSC 4.43
OK
LECTURE
SP
OPC MAGN