Panasonic SLV-SE700B - Manual (Page 13)

Getti
ng Sta
rted
13 Tuning your TV to the VCR
Step 4 : Tuning your TV to the VCR
If your TV has a PERITEL connector, see page 15.
If your TV does not have a PERITEL connector
Follow the steps below so that your TV will properly receive the video signals from
your VCR.
1 Press ?/1 MARCHE/VEILLE to turn on the VCR.
2 Press REGL CANAL on the VCR lightly.
The currently set RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
3 Turn on your TV and select a programme position for the VCR picture.
This programme position will now be referred to as the video channel.
4 Press REGL CANAL.
The TV system appears in the display window.
CHAINE +/–
REGL CANAL ? / 1 MARCHE/VEILLE
MARCHE/VEILLE
REGLAGE
AUTO
REGL CANAL
REGLAGE
AUTO
REGL CANAL
continued