Panasonic SLV-SE700B - Manual (Page 16)

16 Setting up the VCR with the Auto Set Up function
Step 5 : Setting up the VCR with the Auto
Set Up function
Before using the VCR for the first time, set up the VCR using the Auto Set Up
function. With this function, you can set the TV channels, guide channels for the
ShowView system*, and VCR clock* automatically.
Hold down REGLAGE AUTO on the VCR for more than three seconds.
The VCR automatically turns on, starts searching for all of the receivable
channels, and presets them in the appropriate order for your local area
(according to the TV system you selected in “Tuning your TV to the
VCR”).
If you want to change the order of the channels or disable unwanted
programme positions, see “Changing/disabling programme positions” on
page 25.
If you use the SMARTLINK connection (not available on SLV-SE600B),
the Preset Download function starts and the SMARTLINK indicator flashes
in the display window during download.
After the search or download is complete, the current time appears in the
display window for any stations that transmit a time signal (not available on
SLV-SE600B). If the time does not appear, set the clock manually (see page
31).
REGLAGE AUTO
REGLAGE
AUTO
REGL CANAL