Panasonic SLV-SE700B - Manual (Page 24)

24 Presetting channels
Tuning the French CATV channels
This VCR can scan the CATV channels B to Q and the HYPER frequency channels
S21 to S41. On the REGLAGE DES CHAINES menu, the channels are indicated by
S01 to S44 REGLAGE CANAL numbers respectively. For example, channel B is
indicated by REGLAGE CANAL number S01 and channel Q by REGLAGE
CANAL number S23. (See the table below.)
If the CATV channel you want to preset is indicated by its frequency (for example,
152.75 MHz), refer to the table below to find the corresponding channel number.
Channel number S05 is for this example.
Channel system for the French CATV network
Tip
• If you want to return to the previous menu, highlight RETOUR and press OK.
Notes
• The menu disappears automatically if you don’t proceed for more than a few minutes.
• When adjusting ACCORD FIN, the menu may become difficult to read due to interference
from the picture being received.
Corresponding
channel REGLAGE
CANAL
number Receivable
frequency
range (MHz)
B S01 116.75–124.75
C S02 124.75–132.75
D S03 132.75–140.75
D S04 140.75–148.75
E S05 148.75–156.75
F S06 156.75–164.75
F S07 164.75–172.75
G S08 172.75–180.75
H S09 180.75–188.75
H S10 188.75–196.75
I S11 196.75–204.75
J S12 204.75–212.75
J S13 212.75–220.75
K S14 220.75–228.75
L S15 228.75–236.75
L S16 236.75–244.75
M S17 244.75–252.75
N S18 252.75–260.75
N S19 260.75–268.75
O S20 268.75–276.75
P S21 276.75–284.75
P S22 284.75–292.75
Q S23 292.75–300.75
S21 S24 299.25–307.25
S22 S25 307.25–315.25
S23 S26 315.25–323.25
S24 S27 323.25–331.25
S25 S28 331.25–339.25
S26 S29 339.25–347.25
S27 S30 347.25–355.25
S28 S31 355.25–363.25
S29 S32 363.25–371.25
S30 S33 371.25–379.25
S31 S34 379.25–387.25
S32 S35 387.25–395.25
S33 S36 395.25–403.25
S34 S37 403.25–411.25
S35 S38 411.25–419.25
S36 S39 419.25–427.25
S37 S40 427.25–435.25
S38 S41 435.25–443.25
S39 S42 443.25–451.25
S40 S43 451.25–459.25
S41 S44 459.25–467.25
Corresponding
channel REGLAGE
CANAL
number Receivable
frequency
range (MHz)