Panasonic SLV-SE700B - Manual (Page 64)

64 Setting the recording duration time
Setting the recording duration time
To extend the duration
Press z ENR repeatedly to set a new duration time.
To cancel the duration
Press z ENR repeatedly until the indicator disappears and the VCR returns to the
normal recording mode.
To stop recording
To stop the VCR while recording, press x STOP.
Note
• You cannot display the current tape time in the display window when setting the recording
duration time.
After you have started recording in the
normal way, you can have the VCR stop
recording automatically after a specified
duration.
1 While recording, press z ENR.
The indicator appears in the display window.
2 Press z ENR repeatedly to set the duration time.
Each press advances the time in increments of 30 minutes.
The tape counter decreases minute by minute to 0:00, then the VCR stops
recording and turns off automatically.
z ENR
SP
OPC MAGN
0:30 1:00 5:30 6:00 Normal recording