Panasonic SLV-SE700B - Manual (Page 66)

66 Synchronized Recording (SLV-SE800B only)
To cancel the Synchronized Recording function
Press ENR SYNCHRO. The ENR SYNCHRO button turns off.
To stop recording
Press x STOP while recording.
Recording programmes using
the Synchronized Recording
function
Before you start...
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• Set DECODEUR/LIGNE3 to LIGNE3 in
the OPTIONS-2 menu (see page 79).
1 Press CHOIX ENTREE or CHAINE +/– to display “L3” in the display window.
2 Set the timer on the connected equipment to the time of the programme you want
to record, then turn it off.
3 Press SP/LP to select the tape speed.
4 Hold down ENR SYNCHRO for more than two seconds.
The ENR SYNCHRO button lights up and the VCR stands by for recording.
The VCR automatically turns on and starts recording when it receives an input
signal from the connected equipment.
The VCR automatically stops recording when the tape reaches the end or when
the connected equipment stops transmitting an input signal.
ENR SYNCHRO
SP/LP
1 2 3
4 5 6
7 8 9
0 CHOIX
ENTREE
CHAINE +/–