Panasonic AK-MSU930P - Manual (Page 6)

6
5 EL display
When the control item selector switches are selected, the
corresponding adjustment items and adjustment values
appear on the EL display.
Example of EL display
Parts and their functions
<HD DETAIL>
H DTL
LEVEL DEP
+ CLIP
H DTL
15
V DTL
DARK DTL
– CLIP
V DTL
16
CRISP
CORNER
CRISP
7
PEAK FREQ
PEAK FREQ
4
Black shading selector switch
[BLACK SHADING CONTROL]
This is used to correct the black shading (the coloring of
black images). When it is pressed (its lamp is lighted)
and when one of the SHADING R, G or B switches is
then pressed and selected, the adjustment items for the
black shading appear on the LCD display. The black
shading correction can be adjusted using the four
neighboring adjustment rotary encoders.
HSAW: Horizontal sawtooth wave correction
This is used to correct the coloring of black
screen images in the horizontal direction.
Adjustment range: –100 to 100
HPAR: Horizontal parabola correction
This is used to correct the coloring of black
screen images in the horizontal direction.
Adjustment range: –100 to 100
VSAW: Vertical sawtooth wave correction
This is used to correct the coloring of black
screen images in the vertical direction.
Adjustment range: –100 to 100
VPAR: Vertical parabola correction
This is used to correct the coloring of black
screen images in the vertical direction.
Adjustment range: –100 to 100
White shading selector switch
[WHITE SHADING CONTROL]
This is used to correct the white shading. When it is
pressed and its lamp is lighted and when one of the
SHADING R, G or B switches is then pressed and
selected, the adjustment items for the white shading
appear on the LCD display. The white shading correction
can be adjusted using the four neighboring adjustment
rotary encoders.
HSAW: Horizontal sawtooth wave correction
This is used to correct the coloring of white
screen images in the horizontal direction.
Adjustment range: –100 to 100
(0: Equivalent to OFF)
HPAR: Horizontal parabola correction
This is used to correct the coloring of white
screen images in the horizontal direction.
Adjustment range: –100 to 100
(0: Equivalent to OFF)
VSAW: Vertical sawtooth wave correction
This is used to correct the coloring of white
screen images in the vertical direction.
Adjustment range: –100 to 100
(0: Equivalent to OFF)
VPAR: Vertical parabola correction
This is used to correct the coloring of white
screen images in the vertical direction.
Adjustment range: –100 to 100
(0: Equivalent to OFF)
R, G, B shading switches [R, G, B]
These are used to select the video signals targeted for
shading correction from among the R, G and B signals.
The lamp of the selected switch lights.
The HD DETAIL switch will now be used as an example
to describe the EL menu.
When the HD.DTL control item selector switch is
pressed, what is shown in the example in the figure
above appears on the EL display.
The adjustment item title appears on the first line. On
lines 2, 3 and 4 are the adjustment item groups which
can be selected each time an individual adjustment item
is set. At the far left is the
> arrow that indicates the
adjustment item group now selected; on the third tier from
the bottom is the adjustment item which has been
selected; on the second tier from the bottom is the
adjustment value level display; and on the bottom tier is
the adjustment value itself.
To select an adjustment item group, press the $ or #
switch to move the
> arrow to the far left of the line with
the adjustment item group to be selected.
Once the adjustment item to be selected is displayed,
turn the adjustment rotary encoder to set the adjustment
value. To return (initialize) the changed data to the
original data, press the UNDO switch.
If a control switch is pressed and its lamp is turned off or
if another control switch is pressed and the menu screen
has changed, the setting of the adjustment item so far will
be stored.
6 Adjustment rotary encoders
The data of an adjustment item shown on the EL display
can be changed using the neighboring adjustment rotary
encoder.
7 Control item selector switches
When these switches are selected (their lamps are
lighted), the corresponding adjustment items and
adjustment values appear on the EL display. The
adjustment values can be changed using the neighboring
adjustment rotary encoder.
Undo switch [UNDO]
This is used to return the values controlled on the display
to the statuses that existed prior to the control.
Flare OFF switch [FLARE OFF]
This is used to cancel the flare correction function.