Panasonic PT-AE4000U - Manual (Page 13)

About Your Projector
E NGLISH - 13
Preparation
Back and bottom view J
Air intake port Security lock
Attach the commercial shackle lock
which is provided with the projector.
Compatible with the Kensington
MicroSaver Security System.
Front leg adjusters
Screw up/down to adjust the
projection angle.
Lens cover attachment hole
Top cover
Hold the top cover at the back corner
and slightly push up to open.
Air intake port
AC IN
Connect the power cord to
supply electronic power to the
projector.
Safety cable attachment point
Attach the safety cable when
mounted on the ceiling.
Front leg adjusters
Screw up/down to adjust the
projection angle.
HDMI IN
Connect HDMI signal cables.
COMPUTER IN
Connect an RGB/YP
B
P
R
signal
cable.
COMPONENT IN
Connect a YP
B
P
R
signal cable.
S-VIDEO IN
Connect an S-VIDEO
signal cable.
VIDEO IN
Connect an RCA
composite video cable.
Connecting
terminals
TRIGGER IN/OUT
Connect external equipment
controlling cables.
SERIAL
Connect a compatible
cable for controlling the
projector remotely via
your computer.
NOTE:
The projector should only be used with the attached power cord to ensure optimum performance and avoid damage to •
the projector.
Do not open the top cover other than replacing the lamp unit. •
See the functional instructions that is in the provided CD-ROM for more details. •