Caution, Nglish - 7, Precautions with regard to safety – Panasonic PT-AE4000U User Manual

Page 7: Accessories, Power

Advertising
background image

Precautions with regard to safety

E

NGLISH - 7

Important Information

Do not place your hands or other objects

close to the air outlet port.

Doing so will cause burns or damage your hands or

other objects.

Heated air comes out of the air outlet port. Do not

z

place your hands or face, or objects which cannot

withstand heat close to this port.

Do not look into or touch the lights emitted

from the lens while the projector is being used.

Doing so can cause burns or loss of sight.

Strong light is emitted from the projector’s lens. Do

z

not look or place your hands directly into this light.

Be especially careful not to let young children look

z

into the lens. In addition, turn off the power and

disconnect the power plug when you are away from

the projector.

Do not insert any foreign objects into the

projector.

Doing so will cause fire or electric shocks.

Do not insert any metal objects or flammable objects

z

into the projector or drop them onto the projector.

Never attempt to remodel or disassemble

the projector.

High voltages can cause fire or electric shocks.

For any inspection, adjustment and repair work, please

contact an Authorized Service Center.

Do not use the projector while the projection

lens cap is still attached to the projection lens.

If this is not observed, the lens cap will be damaged

and fire will occur.

ACCESSORIES

„

Do not use or handle the batteries improperly,

and refer to the following.

Failure to observe this will cause burns, batteries to

leak, overheat, explode or catch fire.

Do not use unspecified batteries.

z

Use manganese batteries or alkaline batteries.

z

Do not dissemble dry cell batteries.

z

Do not heat the batteries or place them into water

z

or fire.

Do not allow the + and − terminals of the batteries

z

to come into contact with metallic objects such as

necklaces or hairpins.

Do not store batteries together with metallic objects.

z

Store the batteries in a plastic bag and keep them

z

away from metallic objects.

Make sure the polarities (+ and −) are correct when

z

inserting the batteries.

Do not use a new battery together with an old

z

battery or mix different types of batteries.

Do not use batteries with the outer cover peeling

z

away or removed.

Remove the empty batteries from the remote

z

control at once.

Insulate the battery using tape or something similar

z

before disposal.

Do not allow children to reach the batteries.

The battery can cause death by suffocation if

z

swallowed.

If swallowed, seek medical advice immediately.

z

If the battery fluid leaks, do not touch it with

bare hands, and take the following measures

if necessary.

Battery fluid on your skin or clothing could result in

z

skin inflammation or injury.

Rinse with clean water and seek medical advice

immediately.

Battery fluid coming in contact with your eyes could

z

result in loss of sight.

In this case, do not rub your eyes. Rinse with clean

water and seek medical advice immediately.

Do not disassemble the lamp unit.

If the lamp breaks, it could cause injury.

Lamp replacement

The lamp has high internal pressure. If improperly handled,

an explosion and severe injury or accidents will result.

Replacement of the lamp should be carried out by a

z

qualified technician.

The lamp can easily explode if struck against hard

z

objects or dropped.

Before replacing the lamp, be sure to disconnect

z

the power plug from the wall outlet.

Electric shocks or explosions can result if this is not

done.

When replacing the lamp, allow it to cool for at least

z

one hour before handling it otherwise it can cause

burns.

Do not allow infants or pets to touch the

remote control unit.

Keep the remote control unit out of the reach of

z

infants and pets after using it.

CAUTION

POWER

„

When disconnecting the power cord, hold

the plug, not the cord.

If the power cord itself is pulled, the cord will become

damaged, and fire, short-circuits or serious electric

shocks will result.

When not using the projector for an

extended period of time, disconnect the

power plug from the wall outlet and remove

the batteries from the remote control.
Disconnect the power plug from the wall

outlet before carrying out any cleaning.

Electric shocks can result if this is not done.

Advertising