03 connecting your equipment, Rear panel, Connecting your equipment – Pioneer VSX-9110TXV-K User Manual
Page 11: Connecting your equipment 03, Chapter 3
Connecting your equipment
03
11
En
Chapter 3
Connecting your equipment
This receiver provides you with many connection possibilities, but it doesn’t have to be difficult. This page explains the
kinds of components you can connect to make up your home theater system.
Rear panel
Caution
• Before making or changing the connections, switch
off the power and disconnect the power cord from the
power outlet. Plugging in should be the final step.
1
HDMI connectors (x3)
Two inputs and one output for high-quality audio/video
connection to compatible HDMI devices.
Connecting using HDMI
on page 49.
2
XM Radio input
See
Using XM Radio
on page 47.
3
Coaxial digital audio inputs (x2)
Use for digital audio sources, including DVD players/
recorders, digital satellite receivers, CD players, etc.
See also
The Input Setup menu
on page 58 to assign
the inputs.
4
Optical digital audio output / input(s) (x4)
Use the
OUT
jack for recording to a CD or MiniDisc
recorder.
Connecting digital audio sources
on page 15.
Use the
IN
jacks for digital audio sources, including DVD
players/recorders, digital satellite receivers, CD players,
etc.
See also
The Input Setup menu
on page 58 to assign
the inputs.
5
Control input/output
Use to connect other Pioneer components so that you
can control all your equipment from a single IR remote
sensor.
Operating other Pioneer components with this unit’s
sensor
on page 70.
6
Stereo analog audio source inputs/(outputs) (x3)
Use for connection to audio sources such as CD players,
tape decks, turntables, etc.
Connecting analog audio sources
on page 16.
7
Remote input (multi-room and source)
Use for connection to an external remote control sensor
for use in a multi-room setup, for example.
Connecting an IR receiver
on page 54.
8
Component video connections (x4)
Use the inputs to connect any video source that has
component video output, such as a DVD recorder. Use
the output for connection to a monitor or TV.
Using the component video jacks
on page 14.
9
RS-232C connector
Use for connection to a PC for graphical output when
using Advanced MCACC.
Connecting a PC for Advanced MCACC output
on
page 57.
10 iPod input terminal
Use to connect your Apple iPod as an audio source.
Connecting an iPod
on page 46.
OUTLET
IN
IN
IN
OUT
OUT
SWITCHED 100 W(0.8 A) MAX
119
1
VSX-9110TXV_KU.book.fm 11 ページ ２００６年４月４日 火曜日 午後５時１５分