Pioneer VSX-9110TXV-K - Manual (Page 23)

Controls and displays 04
23
En
Display
1 SIGNAL indicators
Light to indicate the currently selected input signal.
AUTO lights when the receiver is set to select the input
signal automatically (page 29).
2 Program format indicators
These change according to which channels are active in
digital sources.
L – Left front channel
C – Center channel
R – Right front channel
SL – Left surround channel
S – Surround channel (mono)
SR – Right surround channel
SBL – Left surround back channel
SB – Surround back channel (mono)
SBR – Right surround back channel
LFE – Low frequency effects channel (the ((( ))) indicators light when
an LFE signal is being input)
3 Digital format indicators
Light when a signal encoded in the corresponding format
is detected.
4 OVER / ATT
OVER lights to indicate that the level of an analog source
is too high. ATT lights when you use the attenuator
( ANALOG ATT ) to reduce it.
5 MULTI-ROOM
Lights when the multi-room feature is active (page 53).
6 VIDEO CONV.
Lights when digital video conversion is enabled (page 61).
7 V.SB
Lights during Virtual surround back processing (page 29) .
8 Sound processing indicators
Light according to the active AV parameter(s) (page 61).
9 TUNER indicators
TUNED – Lights when a broadcast is being received.
STEREO – Lights when a stereo FM broadcast is
being received in auto stereo mode.
MONO – Lights when the mono mode is set using
the MPX button.
10 HDMI connection indicators
Light to indicate the HDMI input currently selected.
11 Master volume level
12 STREAM DIRECT
Lights when Direct / Pure Direct is selected (page 28).
13 Speaker indicators
Indicate the current speaker system, A and/or B (page 51) .
14 Listening mode indicators
THX – Lights when a Home THX mode is selected.
ADV. SURROUND – Lights when an Advanced
Surround mode has been selected.
STEREO – Lights when stereo listening is switched
on (see Listening in stereo on page 28).
STANDARD – Lights when a Standard Surround
mode is switched on (see Listening in surround
sound on page 26).
15 SLEEP
Lights when the receiver is in sleep mode (page 62).
16 Matrix decoding format indicators
2 PRO LOGIC IIx – This lights to indicate 2 Pro
Logic II / 2 Pro Logic IIx decoding (page 26).
Neo:6 – When one of the Neo:6 modes of the receiver
is on, this lights to indicate Neo:6 processing
(page 26).
17 Character display
Displays various system information.
18 SR+
Lights when the SR+ mode is switched on (page 56).
2 1 3 8 7 6 9 10 11
17 13 12 15 18 16
4
14
5
SIGNAL L C R
SL S SR
SBL SB
LFE
SBR
AUTO
ADV.SURROUND
STANDARD
SLEEP
THX
STEREO
SP AB
HDMI
DIGITAL
STREAM
PRO LOGIC
DIGITAL
WMA9 Pro
SR+
96/24
DTS VIDEO
OVER ATT TONE MONO
dB
Hi-bit/sampling
DIALOGUE LOUDNESS STEREO
CONV. V.SB DNR MIDNIGHT TUNED
N eo : 6 2
2
DIRECT
ANALOG
MULTI-ROOM
HDMI
[ 2 ] [ 1 ]
VSX-9110TXV_KU.book.fm 23 ページ ２００６年４月４日 火曜日 午後５時１５分