Pioneer DVR-545H-S - Manual (Page 22)

Connecting up 02
22
En
Connecting to an AV
amplifier/receiver
To enjoy multichannel surround sound you
need to connect this recorder to an AV
amplifier/receiver using the digital coaxial
output.
In addition to a digital connection, we
recommend also connecting using the
stereo analog connection for compatibility
with all discs and sources.
You’ll probably also want to connect a video
output to your AV amplifier/receiver. Use the
ordinary video output (as shown here), or the
S-video output.
Important
• Noise may be output from your speakers
if the recorder is not set up to work with
your AV amplifier/receiver properly (see
Audio Out on page 137).
• Do not connect this recorder to your TV
‘through’ your VCR using A/V cables.
Always connect it directly to your TV.
1 Connect RF antenna cables as shown.
This enables you to watch and record TV
channels.
2 Connect the DIGITAL OUT COAXIAL
jack on this recorder to a coaxial digital
input on your AV amplifier/receiver.
This enables you to listen to multichannel
surround sound.
3 Connect the analog AUDIO OUTPUT
and VIDEO OUTPUT jacks on this recorder
to an analog audio and video input on
your AV amplifier/receiver.
4 Connect the AV amplifier/receiver’s
video output to a video input on your TV.
TV
AV amp/
receiver
Antenna/cable TV
wall outlet
AC IN DIGITAL OUT CONTROL
G-LINK COAXIAL IN S-VIDEO VIDEO AUDIO
L R
COMPONENT VIDEO OUT
Y
P B
P R
ANTENNA
IN
OUT
OUTPUT AV 1 (RGB) – TV AV 2 (INPUT 1/DECODER)
S-VIDEO VIDEO AUDIO
L R
INPUT3
HDMI OUT
ANTENNA
IN
VIDEO
IN
DIGITAL
IN
AUDIO/VIDEO
IN
VIDEO
OUT
1
3
2
1
4
ANTENNA
IN (RF IN)
ANTENNA
OUT
DVR645H_WY_EN.book 22 ページ ２００６年７月５日 水曜日 午前１０時２５分