Recording 06, Setting the picture quality, Recording time – Pioneer DVR-545H-S User Manual

Page 59

Advertising
background image

Recording

06

59

En

During playback or when a menu is being
displayed on-screen, the sound and video is
always routed to your TV and is unaffected by
the

TV/DVD

mode setting.

Note that the recorder must be connected to
your TV using a SCART cable to be able to
use this feature.

Switch between TV mode and

DVD mode.

Setting the picture quality/

recording time

Before starting a recording, you will usually
want to set the picture quality/recording
time. There are six standard settings
available, which allow you to choose a
balance between picture quality and
recording time.

When Manual Recording is set to On (see

Manual Recording

on page 139), a further

option will be available (

MN1

to

MN32

or

LPCM

, depending on what you set).

When recording to DVD+R/+RW,

SLP

is the

longest recording time available. If you
select

SEP

or

MN1

to

MN3

, the recording

mode will automatically revert to

SLP

.

Press repeatedly to select

the recording quality.

XP

– High quality setting, gives about

one hour of recording time on a DVD
disc.

SP

(Standard Play) – Default quality,

used for most applications, gives about
two hours of recording time on a DVD.

LP

(Long Play) – Lower video quality than

SP, but doubles the recording time on a
DVD to about four hours.

EP

(Extended Play) – Lower quality than

LP, but gives about six hours of
recording time on a DVD disc.

SLP

(Super Long Play) – Lower quality

than EP, but gives about eight hours of
recording time on a DVD disc.

SEP

(Super Extended Play) – Lowest

video quality but gives about ten hours of
recording time on a DVD disc.

MN1

to

MN32

/

LPCM

1

– Manual /

Linear PCM (available only when manual
recording is on)

The setting is indicated in the front panel
display, and shown on-screen together with
the recording time for a blank recordable
disc. If a recordable disc is loaded, the
approximate remaining recording time for
that disc is also shown. (Note that if the On
Screen Display setting (see

On Screen

Display

on page 143) is

Off

then this

information is not displayed.)

TV/DVD

DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM

HDD

Note

1 Audio is recorded in 16-bit Linear PCM format, video is recorded at XP quality. When recording a bilingual broad-

cast, select which audio channel to record (see

Bilingual Recording

on page 136).

SHIFT

+

REC MODE

DVR645H_WY_EN.book 59 ページ 2006年7月5日 水曜日 午前10時25分

Advertising
This manual is related to the following products: