Recording 06, Simultaneous recording and, Playback (chase play) – Pioneer DVR-545H-S User Manual

Page 66

Advertising
background image

Recording

06

66

En

1

If the recorder is on, switch it

into standby.

2

[Front panel] Press and hold for

three seconds to lock the controls.

The front panel display briefly shows

LOCK

.

If any buttons are pressed on the remote or
front panel,

LOCK

is briefly displayed again.

• To unlock the recorder, press and hold

STOP

on the front panel (while the

recorder is stopped) for three seconds
until the display shows

UNLOCK

.

Timer recording FAQ

Frequently Asked Questions

• Even though the timer is set, the recorder

doesn’t start recording!

Check that the disc loaded or HDD is
recordable, not locked (see

Lock Disc

on

page 125), and that there are fewer than
99/999 titles already on the DVD/HDD.

• The recorder won’t let me enter a timer

program! Why not?

You can’t enter a timer program if the
clock isn’t set.

• What happens when two or more timer

programs overlap?

Basically, the program with the earlier
recording start time has priority.
However, the recorder will start
recording the program with the later
start time after the earlier program is

finished. If two programs have the same
times (but different channels, for
example), the program set most recently
takes priority.

If VPS/PDC is active for two timer
programs that are programmed to start
at the same time, then the program that
actually starts first takes priority.

Simultaneous recording and

playback (Chase Play)

Chase Play allows you to watch a recording
that is still in progress from the start, without
having to wait until the recording has
finished (i.e., playback is ‘chasing’ the
recording).

In fact, you’re not just limited to watching
the recording in progress. You can watch
anything else already on the HDD (or on a
DVD if you’re recording to the HDD) by
selecting it from the Disc Navigator screen
(see

Using the Disc Navigator with recordable

discs and the HDD

on page 76).

DVR-645H-S:

Chase Play is not possible

when DV is the recording input.

Press during recording to start

playback from the beginning of the

current recording

1

.

Press during recording to select

another title to play.

STANDBY/ON

Note

1 You can’t start playback immediately after recording starts. Simultaneous playback and recording doesn’t work

while copying or backing up.

HDD

PLAY

DISC

NAVIGATOR

DVR645H_WY_EN.book 66 ページ 2006年7月5日 水曜日 午前10時25分

Advertising
This manual is related to the following products: