Panasonic PT-61LCZ7 - Manual (Page 37)

37
Advanced Op
er
a
tion
PC Adjust
You can adjust the picture when “Input select” is selected
to “PC”. (p. 29)
Procedure
1. Press ▲▼ to select “PC adjust”.
2. Press OK to display the PC adjust menu.
3. Press ▲▼ to select each item.
4. Press ◄► to adjust each item.
Note
This function is available only when the signal being viewed
is from a PC.
•
Color temp.
Color mgmt.
AI picture
Pro setting
Zoom adjust
PC adjust
Other adjust
Warm
On
Off
Picture 2/2
Color temp.
Color mgmt.
AI picture
Pro setting
Zoom adjust
PC adjust
Other adjust
Warm
On
Off
Picture 2/2
Normal
Sync
Dot clock
H-position
V-position
Clock phase
Input resolution
H-frequency
V-frequency
No
H & V
-3
0
0
0
VGA
31.4kHz
60.0Hz
PC adjust
Normal
Sync
Dot clock
H-position
V-position
Clock phase
Input resolution
H-frequency
V-frequency
No
H & V
-3
0
0
0
VGA
31.4kHz
60.0Hz
PC adjust
Item Explanations
Normal
Resets all picture adjustments to factory default
settings.
Sync
H&V : The H and V sync signals are input from
the HD/VD connector.
On G : Uses a synchronized signal on the Video
G signal, which is input from the G connector.
•
•
Dot clock Adjusts horizontal size.
H-Position Adjusts horizontal position.
V-Position Adjusts vertical position
Clock phase
Adjusts in order to remove any picture
interference or contour blurring which may occur
in computer images.
Input
resolution
Switches to wide display.
Input signal switched from XGA to WXGA and
from VGA to WVGA.
H-Frequency/
V-Frequency
Displays the frequencies of the PC signal
currently being adjusted.
Displays the H (Horizontal) / V (Vertical)
frequencies.
Display range: Horizontal 15-110 kHz
Vertical 48 - 120 Hz
Item Explanations
Normal
Resets all picture adjustments to factory default
settings.
Sync
H&V : The H and V sync signals are input from
the HD/VD connector.
On G : Uses a synchronized signal on the Video
G signal, which is input from the G connector.
•
•
Dot clock Adjusts horizontal size.
H-Position Adjusts horizontal position.
V-Position Adjusts vertical position
Clock phase
Adjusts in order to remove any picture
interference or contour blurring which may occur
in computer images.
Input
resolution
Switches to wide display.
Input signal switched from XGA to WXGA and
from VGA to WVGA.
H-Frequency/
V-Frequency
Displays the frequencies of the PC signal
currently being adjusted.
Displays the H (Horizontal) / V (Vertical)
frequencies.
Display range: Horizontal 15-110 kHz
Vertical 48 - 120 Hz
Depending on the signal being input, some menu items may or may not be adjustable and some functions may or may
not be available.
Other Adjust
Other detailed picture adjustments can be made.
This function is not available when “Input select” is
selected to “PC”. (p. 29)
Procedure
1. Press ▲▼ to select “Other adjust”.
2. Press OK to display the Other adjust menu.
3. Press ▲▼ to select each item.
4. Press ◄► to adjust each item.
Color temp.
Color mgmt.
AI picture
Pro setting
Zoom adjust
PC adjust
Other adjust
Warm
On
Off
Picture 2/2
Color temp.
Color mgmt.
AI picture
Pro setting
Zoom adjust
PC adjust
Other adjust
Warm
On
Off
Picture 2/2
Video NR
3D Y/C filter
Color matrix
Block NR
Mosquito NR
Black level
3:2 pulldown
On
On
SD
On
On
Dark
On
Other adjust
Video NR
3D Y/C filter
Color matrix
Block NR
Mosquito NR
Black level
3:2 pulldown
On
On
SD
On
On
Dark
On
Other adjust
Item Explanations
Video NR
Reduces noise, commonly called snow. Leave off
when receiving a strong signal.
3D Y/C filter Minimizes noise and cross-color in the picture.
Color matrix
Select SD or HD.
SD : Color matrix is set same as a normal TV
system (NTSC).
HD : Color matrix is set same as a
High-Definition system (ATSC).
With a 480p signal from equipment connected
to COMPONENT VIDEO INPUT (Y, P B , P R ) or
HDMI INPUT terminals or from the unit’s DTV
tuner, you can select SD or HD color matrix to
display the most natural color.
Notes
This feature is available only with 480p signals.
The default setting with HDTV signals (720p,
1080i or 1080p) is HD color matrix.
The default setting with NTSC signals (480i) is
SD color matrix.
•
•
•
•
•
Block NR
Reduces noise of specific digital signals of DVD,
STB, etc.
Mosquito NR Reduces HDTV flicker noise in the contoured
sections of an image.
Black level
Select Light or Dark [Dark : VIDEO, Light :
480i/480p/720p/1080i/1080p] Invalid for Digital
channel, Analog channel, PC and Photo viewer.
3:2 pulldown Transfers film to video.
Item Explanations
Video NR
Reduces noise, commonly called snow. Leave off
when receiving a strong signal.
3D Y/C filter Minimizes noise and cross-color in the picture.
Color matrix
Select SD or HD.
SD : Color matrix is set same as a normal TV
system (NTSC).
HD : Color matrix is set same as a
High-Definition system (ATSC).
With a 480p signal from equipment connected
to COMPONENT VIDEO INPUT (Y, P B , P R ) or
HDMI INPUT terminals or from the unit’s DTV
tuner, you can select SD or HD color matrix to
display the most natural color.
Notes
This feature is available only with 480p signals.
The default setting with HDTV signals (720p,
1080i or 1080p) is HD color matrix.
The default setting with NTSC signals (480i) is
SD color matrix.
•
•
•
•
•
Block NR
Reduces noise of specific digital signals of DVD,
STB, etc.
Mosquito NR Reduces HDTV flicker noise in the contoured
sections of an image.
Black level
Select Light or Dark [Dark : VIDEO, Light :
480i/480p/720p/1080i/1080p] Invalid for Digital
channel, Analog channel, PC and Photo viewer.
3:2 pulldown Transfers film to video.