Panasonic PT-61LCZ7 - Manual (Page 55)

55
Advanced Op
er
a
tion
About
Display the TV set Version and Software License.
Procedure
1. Press ▲▼ to select “About”.
2. Press OK to display the About screen.
3. Press ▲▼ to select “Version” or “License”.
4. Press OK to display the Version or License
screen.
No signal
shut-off
To conserve energy, this Projection Display
automatically turns off when NO SIGNAL continues
more than 10 minutes.
Notes
Not in use when setting “PC”, “Photo viewer mode”,
“Lock”, or Digital channel.
“No signal shut-off was activated” will be displayed
for about 10 seconds when this Projection Display is
turned on for the first time after turning the power off
by “No signal shut-off”.
The on-screen display will flash 3, 2 and 1 to
indicate the last three (3) remaining minutes prior to
the shut-off.
•
•
•
No action
shut-off
To conserve energy, this Projection Display
automatically turns off when no operation of remote or
front panel key continues more than 3 hours.
Notes
Not in use when setting “PC”.
“No action shut-off was activated” will be displayed
for about 10 seconds when this Projection Display is
turned on for the first time after turning the power off
by “No action shut off”.
The on-screen display will flash 3, 2 and 1 to
indicate the last three (3) remaining minutes prior to
the shut-off.
•
•
•
No signal
shut-off
To conserve energy, this Projection Display
automatically turns off when NO SIGNAL continues
more than 10 minutes.
Notes
Not in use when setting “PC”, “Photo viewer mode”,
“Lock”, or Digital channel.
“No signal shut-off was activated” will be displayed
for about 10 seconds when this Projection Display is
turned on for the first time after turning the power off
by “No signal shut-off”.
The on-screen display will flash 3, 2 and 1 to
indicate the last three (3) remaining minutes prior to
the shut-off.
•
•
•
No action
shut-off
To conserve energy, this Projection Display
automatically turns off when no operation of remote or
front panel key continues more than 3 hours.
Notes
Not in use when setting “PC”.
“No action shut-off was activated” will be displayed
for about 10 seconds when this Projection Display is
turned on for the first time after turning the power off
by “No action shut off”.
The on-screen display will flash 3, 2 and 1 to
indicate the last three (3) remaining minutes prior to
the shut-off.
•
•
•
Other adjust
About
Reset
Setup 2/2
Other adjust
About
Reset
Setup 2/2
Version
License
About
Version
License
About
Reset
Setup is reset.
Procedure
1. Press ▲▼ to select “Reset”.
2. Press OK to display the password screen.
3. Enter your password by pressing the
NUMBER keys to reset the Setup settings.
4. The confirmation screen is displayed.
Select “Yes”, and press OK.
Notes
Performing Reset will clear all items set with Setup, such as
channel settings. Use Reset with care.
POWER indicator flashes red. After flashing stops, unplug the
unit then plug it back in and turn power ON.
When using “EZ Sync™ “HDAVI Control™””, with the device
connected, set “EZ Sync” first to “Off” and then “On” using the
Setup Menu. (p. 52-53)
•
•
•
Other adjust
About
Reset
Setup 2/2
Other adjust
About
Reset
Setup 2/2
----
Password
Enter password.
0 - 9
----
Password
Enter password.
0 - 9
Reset in progress.
Please refrain from any
activity. Do not turn off
or unplug the TV.
Reset
Reset all settings
to default.
Reset
Yes No
Reset in progress.
Please refrain from any
activity. Do not turn off
or unplug the TV.
Reset
Reset all settings
to default.
Reset
Yes No