Pentax A30E - Manual (Page 104)

102
Tak
ing Pi
cture
s
4
Set [Shake Reduction] in [ A Rec.Mode] menu to [O (On)] to use the
Shake Reduction function for still images. For details on the function, see
p.54.
1
Press the MENU button in Capture mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23)
to select [Shake Reduction].
3
Use the four-way controller (45)
to select [O (On)/P (Off)].
O (On) : (Shake Reduction On)
appears on the LCD monitor when
you press the shutter release
button halfway.
P ( Off) : (Shake Reduction Off) is always displayed on the LCD
monitor.
4
Press the shutter release button halfway.
The camera is ready for taking pictures.
Setting the Shake Reduction Function for Still
Images to On
You can also select On/Off using the Green button. This function
cannot be used when assigning a function other than Shake
Reduction to the Green button. (
1 p.104)
Rec. Mode
MENU Exit
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
AWB
10
M
AUTO 800
MENU
Shutter release
button
MENU button
Four-way
controller
Rec. Mode
MENU Exit
EV Compensation
Movie
Digital Zoom
Instant Review
Memory
0.5sec 0.5sec
±0.0
Shake Reduction