Pentax A30E - Manual (Page 163)

161
7
Se
ttings
4
Press the Green button, while
displaying [USER] in the upper-
right corner of the screen, and use
the four-way controller (45) to
select an image for the start-up
screen, and press the OK button.
To change a captured image set as a start-up
screen to another image, press the Green button once to delete the image
and press it again to show the screen for selecting a captured image.
5
Press the OK button.
The camera is ready for playing back images.
Setting Up the Start-up Screen Using a Captured Image (Go to
Step 5 to select a start-up screen other than USER)
• Once the start-up screen has been set, it will not be deleted even
if the original image is deleted or the SD Memory Card or built-in
memory is formatted.
• You cannot set up the start-up screen while playing back images
on a TV or other equipment.
Change Change
MENU
USER USER USER
Cancel Cancel Cancel
Change