PhatNoise KDC-W707 - Manual (Page 41)

English | 41
Connecting Wires to Terminals
£
У
О
{
x
И
З
n
£
У
О
{
x
И
З
n
1/
*°
" /

/°
" /
8/°
" /
Battery wire (Yellow)
Ignition wire (Red)
FM/AM antenna input
Antenna Cord (ISO)
Antenna Conversion Adaptor
(ISO–JASO) (Accessory
3)
Wiring harness
(Accessory
1)
If no connections are made, do
not let the wire come out from
the tab.
Power control/Motor
antenna control wire
(Blue/White)
TEL mute wire (Brown)
Connect either to the power
control terminal when using the
optional power amplifier, or to
the antenna control terminal in
the vehicle.
Connect to the terminal that is grounded
when either the telephone rings or during
conversation.
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
Fuse (10A)
To External Display/
Steering remote
See next page
To connect the Kenwood
navigation system, consult
your navigation manual.
External amplifier control wire
(Pink/Black)
To "EXT.AMP.CONT." terminal of the
amplifier having the external amp
control function.
Kenwood disc changer input
To connect the Disc changer,
consult your Disc changer
manual.
A B
C
KDC-W808 KDC-W707
A "FRONT"
Front left output (White)
"FRONT"
Front left output (White)
Front right output (Red) Front right output (Red)
B "REAR"
Rear left output (White)
—
—
Rear right output (Red) —
C "SUB WOOFER"
Sub Woofer left output (White)
—
—
Sub Woofer right output (Red) —
D "AUX IN"
AUX left input (White)
"REAR"/
"SUB WOOFER"
Rear left output (White)/
Sub Woofer left output (White)
AUX right input (Red) Rear right output (Red)/
Sub Woofer right output (Red)
D