Initial setting, Set tel line, Set line mode – Panasonic KX-TG5240AL User Manual
Page 23: Set dial mode, Tone, Programmable settings, Line mode, Dialling mode
Useful Info
rmation
Answering
System
T
e
lephone System
23
Programmable Settings
Preparatio
n
Line Mode
The line mode is preset to “B” and generally should not be adjusted. If “
” is
not displayed on the handset properly, the line mode selection is incorrect. Set line
mode to “A”.
Dialling Mode
If the unit cannot make an outside call, the dialling mode may be incorrect. Set the
dialling mode to “Tone”.
1
Press [MENU].
2
Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key (
).
3
Scroll to “Set tel line” by pressing [d] or
[B], then press the soft key (
).
4
Scroll to “Set line mode” by pressing [d]
or [B], then press the soft key (
).
5
Select “A” or “B” by pressing [d] or [B].
6
Press the soft key (
), then press [OFF].
1
Press [MENU].
2
Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key (
).
3
Scroll to “Set tel line” by pressing [d] or
[B], then press the soft key (
).
4
Press the soft key (
) at “Set dial
mode”.
5
Select “Tone” by pressing [d] or [B].
6
Press the soft key (
), then press [OFF].
Handset
IN USE
SELECT
Initial setting
SELECT
Set tel line
SELECT
Set line mode
Set line mode
:B
SAVE
Handset
SELECT
Initial setting
SELECT
Set tel line
SELECT
Set dial mode
Set dial mode
:Tone
SAVE
TG5240AL.fm Page 23 Friday, June 11, 2004 5:22 PM