Panasonic KX-TG5240AL - Manual (Page 54)

Transferring a Call
54
Quick call transfer
You can transfer a call without waiting for the paged party to answer.
1. During a call, press [HOLD/INTERCOM].
2. Press the extension number ([0] for the base unit, [1] to [4] for the
handset).
3. Press [OFF] to hang up.
1. During a call, press [LOCATOR/INTERCOM/TRANSFER].
2. Press the extension number [1] ( ) to [4] ( ), or press [0] to page all
handsets.
3. Press [SP-PHONE] to hang up.
• The call will be transferred directly.
• The paged party can answer the transferred call by pressing [
C
], [s], or
[SP-PHONE].
• After the paged party answers, the transfer is complete.
• If the paged party does not answer:
— for the handset, press [
C
] or [s] to return to the outside call.
— for the base unit, press [SP-PHONE] to return to the outside call.
• If the paged party does not answer within 60 seconds after you hang up, your
phone will ring and the call will be returned to your phone. You may speak to the
caller again by pressing [
C
], [s], or [SP-PHONE].
If you do not answer the call within 4 minutes, the call will be disconnected.
After speaking to the caller, you may also transfer the caller to a mailbox by
performing the following three steps:
(1) Tell the caller to press the # (pound sign) and the mailbox number of the
person they want to leave a message for after you end the call (p. 64).
(2) Press [HOLD/INTERCOM] on the handset or [LOCATOR/INTERCOM/
TRANSFER] on the base unit.
(3) Press [9] to transfer the caller to the Answering System greeting (p. 72).
(The caller will hear the greeting and can select the appropriate mailbox.)
Handset
Base Unit
TG5240AL.fm Page 54 Friday, June 11, 2004 5:22 PM