Phone Labs Technology Company Phone Labs Dock-N-Talk - Manual (Page 14)

UNIVERSAL DOCKING STATION USER’S GUIDE
14
*Note: This feature works only with certain models of cellular handsets that support Caller ID and make it
available to connected devices.
Call Waiting Calls
When you hear the call waiting beep, you can use the FLASH (or LINK, CALL WAITING, etc.)
Voice Dial Access*
If you have a corded or cordless phone that makes long continuous touch tones, go off hook
and hold down “#” key, for at least one second, using the handset or speaker phone of any
extension set. If your phone makes short, timed touch tones, go off hook and press "0" followed
by a “#” to enter voice dialing mode. Say the name of any voice dial tags that are programmed
into your cell phone. The call will be connected.
*Note: This feature works only with cellular handsets that support voice dialing and make it available to
connected devices.
Voice Mail Access*
If you have a corded or cordless phone that makes long continuous touch tones, go off hook
button on your extension telephone set to connect to the second caller. Pressing the FLASH
button your extension telephone set may toggle between the two callers if that feature is
supported by your cell phone.
Last Number Redial*
If you have a corded or cordless phone that makes long continuous touch tones, go off hook
and hold down “
* ” key, for at least one second, using the handset or speaker phone of any
extension set. If your phone makes short, timed touch tones, go off hook and press “ ** ”
( * twice) and the last number dialed through the cell phone will now be redialed.
*Note: This feature works only with cellular handsets that support last number redial and make it
available to connected devices.