Phone Labs Technology Company Phone Labs Dock-N-Talk - Manual (Page 16)

UNIVERSAL DOCKING STATION USER’S GUIDE
16
detach your cell phone from the Dock-N-Talk™ during a call and continue the call on your
cell phone if your cell phone supports that feature.
*Note: This feature works only with certain models of cellular handsets that
allow the live call transfer feature to be used by connected devices.
HANDSET CHARGING
While your cell phone is connected by a cable to the Dock-N-Talk™, your cell phone
should be charging. You may see the charging indication displayed on the screen
of your cell phone. However, if your battery is completely dead or extremely low on
power, the charging feature may not be able to be activated. Charge your battery
with
your normal charger for at least 15 minutes before docking your cell phone.*
*Note: The Dock-N-Talk’s universal charger will not be able to power your phone
with dead batteries or if no battery is installed. The Dock-N-Talk™ applies a mid-
level charging rate to cell phones.
,NTERCOM3$*,1*
The Dock-N-Talk™ is able to ring all corded or cordless extension telephone sets
connected to it and create a page or intercom call. If you are next to the Dock-N-Talk,
before going off-hook on your extension telephone handset, press the “ ” ringing
button for 2 seconds. Wait until the ringing has stopped and pickup an extension
telephone set and begin speaking to the person who has answered from another
telephone extension set. If you wish to make an intercom call from any extension
telephone set, simply go off-hook and press the "0" key and hang up. You will hear
all the extensions begin to ring. When someone answers the call, the ringing will stop
and you can then go off-hook again and begin speaking.