Phone Labs Technology Company Phone Labs Dock-N-Talk - Manual (Page 25)

UNIVERSAL DOCKING STATION USER’S GUIDE
25
SAFETY AND REGULATORY
When using the Dock-N-Talk™, follow these safety precautions to reduce the risk of
electric shock and personal injury:
1. Read and understand all instructions.
2. Unplug the unit from the wall outlets before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3. Do not use this unit near water (example: a bathtub).
4. Do not place near or over a radiator or heat register.
5. Do not overload wall outlets and extension cords as this can result in the risk
of fire or electric shock.
6. Use only the power source supplied with the unit.
7. Do not disassemble this unit; take it to a qualified serviceman when service
or repair is required. Opening or removing covers may expose you to
dangerous voltages or other risks.
8. Do not use to report a gas leak in the vicinity of this unit.
9. Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power supply cord or plug is damaged or frayed.
b. If the product has been exposed to rain, water or liquid has been
spilled on the product, disconnect the unit and allow it to dry out. Once
dry, it may be tested too see if it still operates; however, do not open
up the product.
c. If the product housing has been damaged.
d. If the product exhibits a distinct change in performance.