Pioneer DVD-V8000 - Manual (Page 29)

Operating Modes
Explanation : The command rewrites the contents of the Speed Register and
returns the completed status message. The current mode of the player
remains the same.
The speed parameter indicates the number of fields per second. The range is
0 through 90 with a default value of 15. The relationship between the integer,
speed parameter and the actual speed of the player is as follows:
Integer Speed Parameter Speed
60 46~90 1/1
30 23~45 1/2
15 12~22 1/4
7 6~11 1/8
4 3~5 1/16
1 0~2 STEP1
NOTE: When ‘REV STEP/REV PLAY’ is set to ‘Resolution’ in ADV.SETUP,
DVD only offers fixed reverse speeds which varies from about 1/8 to about
1/16 depending on the transfer rate.
NOTE: VCD only offers 1/2 to 1/16 forward speeds. Reverse speed is not
available for VCD. Speeds are approximate values only.
Execution :
String Status Return DVD player
4SPMF<CR> R<CR> Play mode to 1
/
16
speed forward
30SP<CR> R<CR> Multi-Speed to ½ Multi-Speed
4SPMR<CR> R<CR> Slow speed reverse
5.16 Search
Function : Search to specified address
Format : Address SE
Explanation : The specified address is written into the Search Register in
accordance with the current Search address mode.
When the Search command is sent to the player, the specified address is
compared with the current address. The pick-up is moved so that the
difference becomes 0.
Upon reaching the specified address, the player enters the Pause mode for a
CD or the Still mode for other disc types. The player then returns the
completed status message. If the player misses the specified address or can
not find it, an error message (E06 or E12) is returned. However, if the disc
program disallows a Time, Chapter or Title Search, the player ignores the
- 22