Phantom Tech Viewpoint VI0508 - Manual (Page 13)

The Viewpoint Screen is designed and engineered
to be maintenance free. The following are some
helpful hints to ensure the smooth operation of the
Viewpoint Screen for years to come.
• All moving components used in the Viewpoint
Screen are manufactured from a mixture of nylon
and other materials. This combination of
compounds is strong, impact resistant, and
self-lubricating. Do not use oil, grease, oil based
sprays or lubricants on any of the components on
the Viewpoint Screen. These products attract
dirt and debris, and may cause the Viewpoint
Screen to react abnormally. However, the periodic
application of a dry silicon lubricant to the moving
parts is permissible.
• We recommend that while not in use, the Viewpoint
Screen be kept in the retracted position. This
will help extend the life of the screen mesh.
In the retracted position, the mesh is protected
and kept clean.
• The Screen Mesh and Bottom Rail should be kept
free of dirt and debris. Lightly vacuum to remove
any obstructions from the Screen Mesh and
Bottom Rail.
* Before installing the Viewpoint Screen, please
take the time to read the installation
instructions thoroughly.
Service and Maintenance
Hints
Mounting Bracket
Fixing Strip
Sliding Bar
Fixing Strip
Clip
13