Parts and tools – Phantom Tech Viewpoint VI0508 User Manual
Page 5
Parts and Tools
Before beginning,
make sure that all these
parts are included with
the Viewpoint Screen
package.
Required Tools
Viewpoint Screens can be sized and installed using common household
tools. Make sure all necessary tools are available before beginning.
NOTE: A chop saw can be used in place of a hacksaw provided that a
bi-metal blade has been properly installed
5
Top Rail
Bottom Rail
Screen Housing
Assembly
Catch Frame
(not required for a
double door application)
5/8” (16 mm)
Pan Head Screws
(12 pcs
.)
1/2” (12 mm)
Flat Head Screws
(2 pcs.)
Door Frame
Corner Cover
Mesh
Mounting Bracket
Clip
Fixing Strip
Tension Wire
Bottom Rail
Sliding Bar Bottom Cap
Catch Frame
Latch Hole
Latch
Sliding Bar
Top Rail
Rollers
Hack saw
Philips
screwdriver
Electric drill
Measuring tape
Level
Carpenter
square
Pen
Corner Cover
Sliding Bar
Bottom Cap
Clips (5 pcs.)