POSIFLEX Business Machines TP-6000 SERIES - Manual (Page 25)

TP6000 USER’S MANUAL 5 - 1
USING THE TOUCH POS
APPLICATION ENVIRONMENT
It is very important that you check the following operational guidelines:
Ventilation
This terminal must NOT be operated in an environment with restricted
ventilation. The installation should be such that there is at least 25mm air clearance
around any top or side ventilation holes. The installation must also be such that there
is a free flow of air around the unit at ALL times.
Operating Environment
The equipment must not be operated or stored in extremes of both temperature
and humidity/moisture.
(Operating range 5°C to 35°C and up to 80% humidity – non condensing)
Power Supply
The operating voltage range of the power adaptor should cover the local power
supply for proper operation. The power cable, the power outlet and any power fusing
arrangements must conform to local safety regulations.
I/O Ports Utilization
The TP6000 series, designed to accommodate today’s and tomorrow’s
technology, has an adequate yet not vast number of I/O ports as limited by spacial
conditions. Therefore, selection on the peripheral device type and the port utilized
now requires some special attention. Here are some recommendations on the device
application:
Serial customer display – use USB to RS232 adapter to connect to USB
port or directly connect to COM1 port
MODEM – use USB modem
MSR – this option is internally connected to KB wedge.