POSIFLEX Business Machines TP-6000 SERIES - Manual (Page 26)

TP6000 USER’S MANUAL 5 - 2
Parallel printer – connect to Parallel port
Serial printer – use USB to RS232 adapter to connect to USB port or
directly connect to COM1 port
Serial barcode scanner – use IW-2000PS2 (RS232 to KB wedge
converter) to connect to PS2 KB port
Cash drawer – connect to CR port
Serial Weight scaler – use IW-2000PS2 (RS232 to KB wedge converter)
to connect to PS2 KB port
Mouse – use PS2 mouse or USB mouse
KB – use PS2 KB or USB KB
Touch panel controller – please select the standard PS2 interfaced model
to free up a serial port COM2.
Should all the recommendations above fail to satisfy the customer’s needs,
please check other Posiflex product series such as TP3000 series or other PST series.
External Monitor
The external VGA port in the TP6000 series supports any regular VGA
monitor using separate AC power up to resolution 1024 x 768 with true color. Unlike
other Posiflex POS terminals, the DC powered 9” VGA mono monitor is not
supported by this series.
Serial Port – COM1
CAUTION: COM1 serial port must always be occupied by either a suitable
serial device or COM1 terminator (as supplied). Without this provision the cash
drawer control ports will fail to work correctly.
The most recommended devices for COM1 are either an external customer
display or a serial POS printer. When such devices are to be installed to the TP6000
series, please remove the COM1 terminator and store in a safe place for future use.
Serial Port – COM2
This is a standard RS232 serial port. However, this port is not available for the
models with RS232 interfaced touch controller (TP6012R, TP6015R). Any attempt to
break the cover of this port will void the product warranty.