Using the self-timer, P.67 t – Pentax Optios7 User Manual

Page 69

Advertising
background image

67

Tak

ing Pi

cture

s

4

In self-timer mode, the picture is taken ten seconds or two seconds after
the shutter release button is pressed.

1

Press the four-way controller (2) in Capture mode.

2

Use the four-way controller
(
45) to select g or r.

3

Press the OK button.

The camera is ready to take pictures using
the Self-timer.

4

Press the shutter release button
halfway.

The focus frame on the LCD monitor will light green when the camera
is in focus.

5

Press the shutter release button fully.

g

The self-timer is engaged and the self-timer lamp lights for about

seven seconds. The picture is taken approximately three seconds
after the self-timer lamp starts to blink.

r

The self-timer is engaged and the picture is taken approximately

two seconds after the self-timer lamp starts to blink.

Using the Self-timer

Focusing may be compromised if you move the camera while the
self-timer is running.

Shutter release button

Four-way controller

OK button

OK

OK

OK

OK

Drive Mode

Drive Mode

Self-timer

Self-timer

Drive Mode

Self-timer

Advertising