Pentax Optios7 - Manual (Page 74)

72
Tak
ing Pi
cture
s
4
You can not only shoot images with the shutter release button, but also
change the zoom magnification with the zoom button using the remote
control unit E (optional).
1
Press the four-way controller (2) in Capture mode.
2
Use the four-way controller (45) to select i or h.
The function is same either in i or h .
3
Press the zoom button on the remote control unit.
Each time you press the zoom button, the zoom position will change
among tele, middle, and wide.
Life of the Battery for the Remote Control Unit
A signal can be sent from the remote control unit to the camera
approximately 30,000 times. Contact your nearest PENTAX customer
service center if the battery needs changing. (A charge is made for
changing the battery.)
Changing the Magnification Using the Remote Control Unit
The zoom position will not change in Macro mode, even if you press
the zoom button. If the camera is in the digital zoom range, the zoom
magnification is cancelled when you press the zoom button.
• The buttons on the camera can be used in the normal way.
• Ensure that the remote control unit is no more than about four
meters away from the front of the camera.
• You cannot change the digital zoom range with the remote control
unit; you can change only the optical zoom range.