Panasonic KX-FPG378 - Manual (Page 73)

8. Programmable Features
71
7. Enter the fax number.
8. Press {SET}.
9. Enter the transmission start time.
L Press {*} repeatedly to select “ AM” or
“ PM”.
10. Press {SET}.
11. Press {MENU}.
Note:
L To cancel after programming, press {STOP}
then {SET}.
{#}{ 2}{6} Setting the Caller ID list to print
automatically
AUTO CALL. LIST
MODE=OFF [ ±]
{ 1} “ ON”: The Caller ID list will be printed
automatically each time the base unit logs 30
different callers (page 39).
{
2} “ OFF” (default): The Caller ID list will not be
printed, but the base unit will keep a record of the
information for the last 30 different callers.
{#}{ 3}{1} Activating the Distinctive Ring
feature
DISTINCTIVE RING
MODE=OFF [ ±]
{ 1} “ ON”
{ 2} “ OFF” (default)
See page 55 for details.
{#}{ 3}{2} Setting the ring pattern for fax
(Distinctive Ring feature)
FAX RING PATTERN
RING=B–D [ ±]
{ 1} “ A”
{ 2} “ B”
{ 3} “ C”
{ 4} “ D”
{ 5} “ B-D” (default)
See page 56 for details.
{#}{ 3}{4} Setting the quick scan
QUICK SCAN
MODE=OFF [ ±]
This feature is helpful when you want to remove
the document for other uses, because the unit
will release the document before sending or
copying.
{
1} “ ON”: The unit will scan the document and
store it into memory first, then the unit will start
sending or copying.
{
2} “ OFF” (default): Deactivates this feature.
Note:
L If the document exceeds the memory
capacity, sending of the whole document or
copying of the exceeded document will be
canceled and this feature will be turned OFF
automatically.
{#}{ 3}{6} Receiving oversized documents
RCV REDUCTION
MODE=92% [ ±]
If the size of the document sent by the other
party is as large as or larger than the recording
paper, the unit can reduce the document and
print it. Select the desired reduction rate.
{
1} “ 72%”
{ 2} “ 86%”
{ 3} “ 92%” (default)
{ 4} “ 100%”
Note:
L The information of the sending party is
printed on the top of each page. Therefore,
even if the original document is the same size
as the recording paper, the document will be
divided into 2 sheets when printed at
“
100%”. Select “92%” to print on 1 sheet.
{#}{ 3}{9} Changing the base unit display
contrast
LCD CONTRAST
MODE=NORMAL [ ±]
{ 1} “ NORMAL” (default): For normal contrast.
{ 2} “ DARKER”: Used when the display contrast
is too light.
Note:
L To change the handset display contrast, see
page 76.
Setting Recording
paper size Original
document
size
“ 100%” Legal Letter, A4
A4 Letter
“ 92%”
(default)
Letter Letter
Legal Legal
A4 A4
“ 86%” Letter A4
“ 72%” Letter Legal
A4 Legal
FPG379-PFQX2138ZA-en.book Page 71 Wednesday, January 12, 2005 4:49 PM