Installation (base unit), 6 ink film, Ink film – Panasonic KX-FPG378 User Manual
Page 15: 6 ink film, 1 installing the ink film
1. Introduction and Installation
13
For Fax Advantage assistance, call 1-800-435-7329.
Installation (Base Unit)
1.6 Ink film
The included film roll is a starter ink film.
1.6.1 Installing the ink film
Important:
L
Remove all the blue shipping tape from
the unit before installation.
1
Open the front cover by pulling up the center
part.
2
Release the back cover by pushing the green
button (
1).
L
You can also release the back cover by
pushing in the green lever (
2).
3
Open the back cover.
4
Insert the front ink film roll by inserting its
blue gear into the left slot of the unit (
1).
Insert the rear ink film roll by inserting its
white gear into the left slot of the unit (
2).
L
The ink film is safe to touch and will not
rub off on your hands like carbon paper.
L
Make sure the blue gear (
1) and white
gear (
2) are installed as shown.
2
1
2
1
FPG379-PFQX2138ZA-en.book Page 13 Wednesday, January 12, 2005 4:49 PM