Panasonic KX-FPG378 - Manual (Page 76)

8. Programmable Features
74
Features (Handset)
8.5 Handset programming
Important information
L Make sure the handset and base unit are
not being used.
1 Press {MENU}.
2 Press the code number ({0} to {9} and {#}).
3 Press the desired direct command to display
the desired setting.
L This step may be slightly different
depending on the feature.
4 Press {Save} (soft key
1).
5 Press {OFF}.
Note:
L To exit programming, press {OFF} at any
time.
8.6 Direct command chart for handset
For more details on the features, see page 76 to page 77.
{ OFF}
{ MENU}
1
Feature Feature code Direct command Page
Ringer volume { 1}{1} { 1}: Low {2}: Medium
{ 3}: High (default) {0}: Off
page 27
Ringer tone { 1}{2} { 1}: “ Tone 1” (default)
{ 2}: “ Tone 2” {3}: “Tone 3”
{ 4}: “ Melody 1” {5}: “Melody 2”
{ 6}: “ Melody 3” {7}: “Melody 4”
page 76
Message play { 2} ---------- page 61
Voice enhancer { 5} { 1}: “ On” {0}: “Off” (default) page 32
LCD contrast { 0}{1} { 1}-{6}: Level 1-6 page 76
Key tone { 0}{2} { 1}: “ On” (default) {0}: “Off” page 76
Auto talk { 0}{3} { 1}: “ On” {0}: “Off” (default) page 76
Caller ID number auto edit { 0}{4} { 1}: “ On” (default) {0}: “Off” page 42
Set dial mode { 0}{5}{1} { 1}: “ Pulse” {2}: “Tone” (default) page 76
Set flash time { 0}{5}{2} { 1}: “ 700ms” (default)
{ 2}: “ 600ms” {3}: “400ms”
{ 4}: “ 300ms”
{ 5}: “ 250ms” {6}: “110ms”
{ 7}: “ 100ms” {8}: “90ms”
page 76
Set line mode { 0}{5}{3} { 1}: “ A” {2}: “B” (default) page 76
FPG379-PFQX2138ZA-en.book Page 74 Wednesday, January 12, 2005 4:49 PM