Pioneer DV-466-S - Manual (Page 11)

Connecting up 02
11
En
Chapter 2
Connecting up
Rear panel connections
• When connecting this player up to your
TV, AV receiver or other components,
make sure that all components are
switched off and unplugged.
1 DIGITAL AUDIO OUT – COAXIAL
This is a digital audio output for connection to
a PCM, Dolby Digital, DTS and/or MPEG-
compatible AV receiver that has a coaxial
digital input.
Connect using a commercially available
coaxial digital audio cable.
2 COMPONENT VIDEO OUT
This is a high quality video output for connec-
tion to a TV, monitor or AV receiver that has
component video inputs.
Connect using a commercially available
three-way component video cable. Be careful
to match the colors of the jacks and cables for
correct connection.
3 AUDIO OUT L / R
This pair of analog audio outputs connects to
your TV, AV receiver or stereo system. Even if
you are connecting up one of the digital
outputs, we still recommend you connect
these jacks.
Use the supplied audio/video cable when
connecting these jacks. Match the colors of
the jacks and cables for correct stereo sound.
4 AC IN
Connect the supplied power cable here, then
plug into a power outlet.
5 VIDEO OUT D1/D2 (Taiwanese model
only)
Use to connect this player to a TV with a D
video input.
6 VIDEO OUT
This is a standard video output that you can
connect to your TV or AV receiver using the
supplied audio/video cable.
DIGITAL AUDIO OUT
S
L
R
P R
P B Y
COAXIAL
OPTICAL
COMPONENT VIDEO OUT
AUDIO OUT
VIDEO OUT
VIDEO OUT
D1 /D2
Taiwanese model
1
5 7 8 6
3 2 4
DV260.book 11 ページ ２００３年１月２８日 火曜日 午後７時２０分