Pioneer DV-466-S - Manual (Page 14)

Connecting up 02
14
En
Connecting using the
component video output
You can use the component video output
instead of the standard video out jack to
connect this player to your TV (or other equip-
ment). This should give you the best quality
picture from the three types of video output
available.
• Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT jacks to a component video
input on your TV, monitor or AV receiver.
• To set up the player for use with a progres-
sive scan TV, see Component Out on
page 52.
Taiwanese model only:
Connecting using the D1/D2
video output
If your TV is equipped with a D type video
input, you can use a D video cable to connect
this player to your TV.
• Use a D video cable (not supplied) to
connect the VIDEO OUT D1/D2 jacks to a D
type video input on your TV, monitor or
AV receiver.
• The D video output on this player outputs
only NTSC video.
DIGITAL AUDIO OUT
S
L
R
P R
P B Y
COAXIAL
OPTICAL COMPONENT VIDEO OUT
AUDIO OUT
VIDEO OUT
TV
COMPONENT
VIDEO IN
DIGITAL AUDIO OUT
S
L
R
P R
P B Y
COAXIAL
OPTICAL
COMPONENT VIDEO OUT
AUDIO OUT
VIDEO OUT
VIDEO OUT
D1 /D2
TV
D VIDEO
INPUT
Taiwanese model
DV260.book 14 ページ ２００３年１月２８日 火曜日 午後７時２０分