Pioneer DV-466-S - Manual (Page 47)

Audio Settings menu 07
47
En
1 Press HOME MENU and select ‘Audio
Settings’ from the on-screen display.
2 Highlight Virtual Surround, then use
the / (cursor left/right) buttons to
change to ‘ 2 V/SRS TruSurround’ or ‘Off’,
as required.
3 Press ENTER to make the setting and
exit the Audio Settings screen.
• You can also use the SURROUND button
on the remote control to switch Virtual
Surround on (
2 V/SRS TruSurround )/
Off .
• Virtual Surround doesn’t work with DTS or
96kHz linear PCM audio through either
the analog or digital outputs.
• If the player is outputting Dolby Digital or
MPEG bitstream audio (in other words, no
conversion to PCM), Virtual Surround has
no effect on the audio from the digital
output. See
Digital Audio Out settings on
page 50 for how to set up the digital
output formats.
• How good the surround effect is varies
with the disc.
Audio Settings
Play Mode
Setup Navigator
Disc Navigator
Initial Settings
Video Adjust
HOME MENU
DVD
Audio Settings
Audio DRC
Virtual Surround
Off
Off
DV260.book 47 ページ ２００３年１月２８日 火曜日 午後７時２０分