Panasonic DIGA DMR-EZ48V - Manual (Page 62)

62
RQT9056
Status Messages
Perform steps 1−3 of “Accessing the Setup Menu” ( 55).
Choose whether to show status messages automatically or not.
,  to select “Display”, then 
,  to select “Status
Messages”, then OK
,  to select “Automatic” or
“Off”, then OK
On-screen Language
Perform steps 1−3 of “Accessing the Setup Menu” ( 55).
Choose the language for these menus and the on-screen
messages.
,  to select “Display”, then 
,  to select “On-screen
Language”, then OK
,  to select “English”,
“Español” or “Français”, then
OK
Black Background (Analog)
Perform steps 1−3 of “Accessing the Setup Menu” ( 55).
Select whether to show the black (gray) background, normally
shown when TV reception is poor.
,  to select “Display”, then 
,  to select “Black
Background (Analog)”, then OK
,  to select “On” or “Off”, then
OK
,  to select “Stereo 1”,
“Stereo 2” or “Mix”, then
OK
[Stereo 1] Records audio (L1, R1)
[Stereo 2] Records added audio such as narration (L2, R2)
subsequent to original recording.
[Mix] Records both Stereo 1 and Stereo 2.
 Incorrect settings can cause noise to be output which can
be harmful to your ears and speakers, and audio will not be
recorded properly on media such as mini discs.
,  to select “DTS”, then
OK
DTS 
After selecting “Digital Audio Output” ( 61, step 5).
Choose whether to output by “Bitstream”, which processes
DTS signals on other connected equipment, or to convert the
signals to “PCM” (2ch) on the unit before output.
,  to select “Bitstream” or
“PCM”, then OK
[Bitstream] When you have connected the unit to equipment
displaying the DTS logo.
[PCM] When you have connected the unit to equipment
that doesn’t have the DTS logo.
,  to select “Select Audio
Channel For DV Input”, then
OK
You can select the kind of audio when recording from the unit’s
DV in terminal (
29).
Perform steps 1−3 of “Accessing the Setup Menu” ( 55).
Select Audio Channel For DV Input
Setup Menus
,  to select “Audio”, then 