Troubleshooting guide, Press and hold for more than 5 seconds, Press and hold both buttons for about 5 seconds – Panasonic DIGA DMR-EZ48V User Manual

Page 81: Press and hold for more than 10 seconds

Advertising
background image

81

RQT9056

Troubleshooting Guide

Use the following connection to suit the antenna lead to
the unit’s RF IN terminal, and the 75

 coaxial cable to the

antenna terminals on your TV or other equipment. Refer to the
other equipment’s operating instructions for more information.

If you connected this unit and a TV without an audio/video
cable, interference (lines or patterning) or a very poor picture
may appear on the TV. If this happens, follow the steps below
to change the video playback channel (RF output channel) to
remove the interference.

This unit

from the antenna

(Flat) Twin lead
300

 cable

300−75

 transformer

To this unit’s RF
IN terminal

Other equipment (television etc.)

75−300

 transformer

75

 coaxial

cable

VHF or UHF

Television

If the Antenna Connector doesn’t Match

Changing RF Output Channel

TRACKING/V-LOCK

CH

to select “CH 3” or “CH 4”.

The unit’s display
Each time you press the button:
CH 3 (Default setting)

 CH 4  OFF


For connections with the audio/video cable, set the RF
output channel to “OFF”.

RF Output Channel

Press the channel up/down buttons
to select a RF Output Channel.

Ch. 3

OK

Press and hold

for more than
5 seconds.

The RF output

channel number
displays on the
unit’s display.

OK

to fi nish.

Notes

When you set the RF output channel to “CH 3” or “CH 4”
Video from this unit can be viewed on channels 3 and 4 on
the TV. Press [VCR/TV] to switch to VCR mode and output
video from this unit (

16).

To Reset This Unit

To reset the channel information and the
clock settings

On the main unit

CH

CH

Press and hold both buttons

for about 5 seconds.

To reset the ratings level settings

With the unit stopped

OPEN/CLOSE

to open the disc tray.

On the main unit

REC

CH

CH

SD CARD

Press and hold both buttons for
about 5 seconds.

To restore the unit if it freezes

On the main unit

POWER

Press and hold for more than

10 seconds.

–The unit is off.

or

On the main unit

RESET

Press and hold for
more than 1 second
with a pointed object.

You can reset both parental rating (

56) and

DVD-Video rating (

59).

Ref

erence

Advertising
This manual is related to the following products: