Panasonic DMC-FX01 - Manual (Page 29)

Basic
29
VQT0V86
4 Press [MENU/SET] to close the
menu.
• You can also press the shutter
button halfway to close the menu.
∫ Entering the digital zoom range
The on-screen zoom indication may
momentarily stop moving when you rotate
the zoom lever to the extreme Tele position.
You can enter the digital zoom range by
continuously rotating the zoom lever to Tele
or releasing the zoom lever once and then
rotating it to Tele again.
1 Optical zoom
2 Digital zoom
3 Extended optical zoom
• When using the digital zoom, the AF area
on the center of the screen is displayed
and it is bigger than usual. (P67)
• In digital zoom, the larger the picture the
lower the picture quality.
• In the digital zoom range, the stabilizer
function may not be effective.
• When using the digital zoom, we
recommend using a tripod and the
self-timer (P40) for taking pictures.
• The indicated zoom magnification is an
approximation.
• The digital zoom does not work in simple
mode [ ] or [HIGH SENS.] in scene mode.
Checking the
Recorded Picture
(Review)
You can check the recorded pictures while
still in [REC] mode.
1 Press 4 [REV].
• The last recorded picture appears for
about 10 seconds.
• Review is canceled when the shutter
button is pressed halfway or the 4
[REV] is pressed again.
• You can check other pictures by
pressing 2/1.
• When the recorded pictures are too bright
or too dim, compensate the exposure. (P41)
2 Rotate the zoom lever towards
[ ] [T] to enlarge the picture.
• Rotate the zoom lever to [ ] [T] for a
4 k magnification and then rotate it
even more for a 8 k magnification.
When you rotate the zoom lever
towards [
] [W] after enlarging the
picture, the magnification becomes
lower.
W
W
W
T
T
T
≥[OFF]:
≥[ON]:
REVIEW1X
DELETE 4X EXIT
VQT0V86ENG.book 29 ページ ２００６年１月３０日 月曜日 午前９時４６分